Customer Connection Enclosure CCE-A11121LX1/GY

Fibre Optic External Enclosure, Code article: 857-01444

Principales caractéristiques

  • 2 x SC Simplex or LC Duplex Adaptors
  • Fibre Management for 4 x 3A splices
  • Integral positive fibre management and storage capacity
  • 6 inbound/outbound access points
  • Through the wall capability
  • Loop through facility
  • Tamper-proof fitting - captive screw and nut
  • IP54 Rated

Application

The Customer Connection Enclosure (CCE) has been designed to be used as an external building entry point. The closure can be wall mounted providing a fibre termination and external network test point. The CCE has been designed to be the same size as a 'Brick Blow-Out Cover' to cover any unslightly damaged caused by drilling.

Cable ∅ max 8.5mm
Cable ∅ min 2.5mm
Colour Grey (GY)
GLOBAL PART DESCRIPTION CCE-A11121LX1/GY
Package Quantity per box
Product Family Fibre Optic External Enclosure
Product Group Customer Connection Enclosure
Splice Capacity 4
Technical Description The Customer Connection Enclosure (CCE) supports 2 x SC Simplex or LC Duplex adaptors. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre. The closure has 6 entry/exit ports at the bottom of the closure which are suitable for cables and ducts upto a maximum diameter of 8.5mm. A loop through facility allows for single fibre elements to be removed and spliced whilst the remaining fibres can be fed on to the next connection point. A single port in the rear of the closure allows for fibre to be passed through the wall into the customer premises. Mechanical fixing is provided to secure all incoming/outgoing cables/blown fibre ducts and to provide strain relief where necessary. Internal positive fibre management and fibre retention clips maintain a minimum 30mm bend radius throughtout for upto a maximum of 50m of 1.1mm diameter cable.
Depth (D) 37mm
Height (H) 263mm
Width (W) 130mm
Material Acrylonitrile Butadiene Styrene, UV stabilised (ABSUV)
EAN / GTIN 5022660162619

Update: 16/09/2018 © HellermannTyton 2018
Contact